Lionel trains, MTH trains, K-Line, other toy trains at Trainz.com

Home > Trains-O Modern > Electronics and Wiring

FEATURED PRODUCTS

MTH 50-103 Proto-DCRU-WG Reverse Unit $49.99	Z-Stuff DZ-1200 Station Announcement System $85.99 Was $106.50 Save 19% While quantities last	MTH 50-106 Proto-DCRU-WSM Reverse Unit $42.49	Z-Stuff DZ-1260 Water Tower Animator $36.99 Was $45.75 Save 19% While quantities last
MTH 50-1024 ProtoSound Battery $10.29	MTH 50-1023 Original Proto-Sound 1 Reset Kit $22.19 Was $24.95 Save 11% While quantities last	Atlas 312 50 Ft. 5-Conductor Ribbon Wire $21.59	TTU 153E Electronic Accessory Contactor $19.99
MTH 50-1032 TIU/TMCC-Legacy 6’ Connector Cable V2 $16.89 Was $19.95 Save 15% While quantities last

There are 26 results

Sort By:

Results Page:

	Atlas 201 #3 Spade Connectors This is an Atlas 201 #3 Spade Connectors Pack. This pack includes 24 pieces. These connectors can be used to connect your wiring to batteries.	$3.99

	Atlas 220 Controller Here is an Atlas 220 Controller. This control provides the simplest way to wire and control tricky reverse loops, wyes and turntables. Has reversing switches for two mainline cabs plus a switch, selectable by either cab, for directional control on reversing loops, etc. Couples with #215 Selectors.	$7.99

	Atlas 312 50 Ft. 5-Conductor Ribbon Wire This is an Atlas 312 5 Consuctor Ribbon Wire-50 Feet. This wire helps make wiring your layout easier than ever! Included are blue, yellow, green, red and black wire to make a total of 50 feet.	$21.59

	Atlas 318 50 Ft. Yellow Layout Hookup Wire This is an Atlas Yellow Layout Wire Reel. This reel has 50 feet of 20 gauge stranded wire.	$5.99

	Atlas 319 50 Ft. Light Blue Layout Hookup Wire This is an Atlas 319 Light Blue Wire Reel. This reel is 20 gauge, standard and contains 50 feet of wire.	$5.99

	Atlas 56 Switch Control Box The Atlas Switch Control Box is an electrical switch that controls the setting of remote switch machines by a momentary burst of power. Merely slide the button to the position desired and depress briefly. It is designed to be connected to other #56 switches using the screw terminals and spades on their sides. Includes printed instructions on the reverse side of the package.	$2.99 Was $3.75 Save 20% While quantities last

	Atlas 6938 15 Foot Signal System Cable This is an Atlas 6938 15 Foot Signal System Cable. This is for 3-rail and 2-rail signal operation. This can be used with items such as the Realistic Road Signal 4-pack. This includes 6 pin modular connectors.	$5.99

	Atlas 6939 25 Foot Signal System Wire This is an Atlas 6939 25 foot Signal System Wire. This is for 3-rail and 2-rail signal operation. This wire can be used with items such as the Realistic Road Signal 4-pack. This includes 6 pin modular connectors.	$8.99

	K-Line 21438 Remote Controller Activate all Standard O dump cars, operating boxcars and milk cars on your layout with one Remote Controller!	$27.99 Was $32.99 Save 15% While quantities last

	Lionel RailScope 6 AA Battery Kit Holder This is a Lionel RailScope Battery Kit. This RailScope system can be modified to accept 6 AA alkaline batteries which will provide 3 to 4 hours of operation. For use in typical HO or O gauge boxcars.	$2.99

	Miniatronics All Scale LED Interior Building Lights MT-/Box This is a Miniatronics All Scale LED Interior Building Lights Kit. This kit includes 7 LEDs, a power board, 10 inches of 30 gauge wire, and double sided mounting tape. Instructions are included. These lights can be used for DC and DCC. They are voltage regulated, rectified, AC/DC 14 VAC run on DCC and 6VDC lights at 4-5V.	$14.99

	MTH 50-1009 6' Mini to Mini Plug DCS Cable MTH 50-1009 6 foot mini-to-mini cable.	$8.89

	MTH 50-1021 Proto-Sound Loco.Battery Charger Kit Here is a MTH 50-1021 Proto-Sound Locomotive External Battery Charger Kit. This features an easy-to-install kit which provides the external battery charger port you need to recharge your locomotive without putting it on the track(requires the 50-1019 Proto-Sound Battery Charger). This kit includes Proto-Sound External Battery Charger Port , 9v Battery Connector, Proto-Sound Circuit Board Connector.	$8.89 Was $9.95 Save 10% While quantities last

	MTH 50-1023 Original Proto-Sound 1 Reset Kit This is an MTH 50-1023 Original Proto-Sound Reset Kit from 2007. Features include proto-sound, a chip puller, original proto-sound, a reset chip and a 8.4v NiCad rechargeable battery. Use this to reset ProtoSounds 1 Locomotives.	$22.19 Was $24.95 Save 11% While quantities last

	MTH 50-1024 ProtoSound Battery MTH 50-1024 AA NiCad Proto-Sound battery.	$10.29

	MTH 50-103 Proto-DCRU-WG Reverse Unit Here is a MTH 50-103 Proto-DCRU-WG Reverse Unit. This unit contains?. All original wiring, and original paperwork.	$49.99

	MTH 50-1032 TIU/TMCC-Legacy 6’ Connector Cable V2 Here is a MTH 50-1032 TIU/TMCC-Legacy 6’ Connector Cable. This cable includes RS232 Serial Jacks and the measures:6'.	$16.89 Was $19.95 Save 15% While quantities last

	MTH 50-106 Proto-DCRU-WSM Reverse Unit Here is a MTH 50-106 Proto-DCRU-WSM Reverse Unit. This unit includes all wiring, and original paperwork.	$42.49

	MTH 50-708 Proto-Sounds Speaker Here is a MTH 50-708 ProtoSounds Speaker. This speaker comes intact with all wiring, and is 0.2 Volts. The packaging has some minor shop ware.	$10.29

	Train America Studios K-27 Sound Activation Boxes w/AC This is a Train America Studios K-27 Sound Activation Boxes (2) with AC Adapter. They are for use with O gauge layouts. This will help with sound quality as well as activate the whistle and bell options. Included are 2 sound activation boxes, an AC adapter, and 2 sets of sound boards with wires and 2 speakers.	$299.99

	TTU 153E Electronic Accessory Contactor This is a TTU 153E Electronic Accessory Relay Contactor. It is an electronic replacement for the Lionel 153C mechanical contactor. This works with an insulated ground rail track section to trip the relay which then changes lights from green to red. Make your own insulated track section with the 6 included insulators, or purchase the Lionel 12841 O27 track, the Lionel 12840 O Gauge track, or the Lionel 12029 Fastrack section to trigger it. The 153C contactors are used with the Lionel 153 Block Signal, the 163 Block Signal, the 148 Dwarf Signal, the 452 Signal Bridge, and the 450 Dual Signal Bridge, which requires 2 153E's. Complete easy-to-follow instructions are included.	$19.99

	Z-Stuff DZ-1015 8-ohm Speaker w/Enclosure Give your crossing bells a boost with this speaker, it is designed to improve the sound output of DZ-1010 and DZ-1020 which are sold separately.	$6.99 Was $8.25 Save 15% While quantities last

	Z-Stuff DZ-1200 Station Announcement System Train time is a big event at stations equipped with this system that uses your train names or numbers, plus the names of arrival and destination cities on your O-, S- or HO-layout! Small barcodes placed under a baggage or passenger car automatically identify up to 16 different trains on two thru- or dead-end tracks. The unit also senses each train's direction of travel to make appropriate announcements! Trains can be restarted manually or automatically with a built-in auto (timed) release, like th postwar 132 Auto-stop station, except a little more high-tech. And since the unit is speed sensitive, fast express trains just roll by.The announcements are easy to set up - the system talks you through it!	$85.99 Was $106.50 Save 19% While quantities last

	Z-Stuff DZ-1205 Set of 2 Infrared Sensors For use with DZ-1200 Station Announcement Systems, DZ-1260 Water Tower Animator, and DZ-1265 Diesel Fueling Animator. Please see photos for more information.	$3.99 Was $5.00 Save 20% While quantities last

Results Page: