Lionel trains, MTH trains, K-Line, other toy trains at Trainz.com > Trains

FEATURED PRODUCTS

Aristo-Craft 55470 DC Train Engineer Wireless Set $230.99 Was $240.00 Save 3% While quantities last		LGB 50111 6 Amp 120 Volt AC Transformer $215.99 Was $241.98 Save 10% While quantities last		LGB 55056 Wireless Receiver for LGB's 55015, 55050/55051 $217.99 Was $244.98 Save 11% While quantities last		Crest 55465 Switching Power Supply $160.99 Was $179.00 Save 10% While quantities last
Aristo-Craft CRE55401 10 Amp Power Pack $75.99 Was $84.99 Save 10% While quantities last

There are 31 results

Sort By:

Results Page:

	Aristo-Craft 5400 1.8 Amp Power Pack This is an Aristo-Craft 5400 1.8 Amp Power Pack. It features a plastic housing.	$69.99 Was $70.00 Save 0% While quantities last

	Aristo-Craft 55451 3.5 Amp DC Power Supply Here is an Aristo-Craft 55451 3.5 Amp DC Power Supply. It will work with any DC-operated trains, but works best with G Scale trains. It puts out 56 VA of power. It also features direction control and AC output for accessories.	$74.99

	Aristo-Craft 55470 DC Train Engineer Wireless Set Features Include: * - Easy to connect to your current power supply * - Control your locomotive up to 300 ft. away! * - Wireless FM Radio Control for ALL GAUGES * - NO locomotive modification necessary * - Works with up to 10 amps DC continuous current * - Switchable between Linear or Pulse Width Control * - Control Up to 100 Receivers with a single Transmitter * - Adjustable momentum speed control for realistic starting and stopping * - Safety pause when switching directions to prevent motor wear.	$230.99 Was $240.00 Save 3% While quantities last

	Aristo-Craft 55471 DC Train Engineer 27Mhz This is an Aristo-Craft 55471 DC Train Engineer RX/27MHz. Installing a second Train Engineer Receiver allows you to control a second track on your layout. Each receiver handles up to 10 amps of continuous DC current and can be installed easily.	$156.99 Was $162.00 Save 3% While quantities last

	Aristo-Craft 55474 Remote Accessory Receivers Here is an Aristo-Craft 55474 Remote Accessory Receiver. The transmitter was designed to simulate the television ôclickerô that virtually everyone has now come to use instinctively. The case is made to be ergonomically easier for most sized hands and to make single thumb control practical. A flexible ôrubber duckyô type antenna was chosen to add a safety factor. The buttons were given long life switches for reliability. The entire case was molded out of ABS plastic to minimize breakage. Larger G Gauge locomotives with multiple motors and multiple lash ups of locomotives with long and heavy trains can require up to 10 amps of DC power on a continuous basis. The Train Engineer Track Receiver (track receiver) is capable of handling these demands. The track receiver is also at home with the relatively low amperage and voltage demands of the locomotives and trains of the smaller gages including O, HO and N scales.	$86.99 Was $89.00 Save 2% While quantities last

	Aristo-Craft 55499 Cooling Fan for 55471 (Above 5 Amps) Here is an Aristo-Craft 55499 Cooling Fan for the 55471 above 5 amps.	$25.49 Was $26.00 Save 1% While quantities last

	Aristo-Craft 57000 G Train Engineer (2.4GHz) This is an Aristo-Craft 57000 G Train Engineer 2.4GHz. This revolutionary system allows for the use of a computer-style network to control your trains. The signal travels through the air instead of the track, obviating the need to contantly clean your trackwork. Great for use with battery-powered engines. This powerful unit can control up to 999 trains and can also control trains with 24-engine lash-ups. The remote includes a digital display and a quick-response speed control knob. The 57000 includes the remote and command base.	$295.99 Was $300.00 Save 1% While quantities last

	Aristo-Craft CRE55401 10 Amp Power Pack This is an Aristo-Craft CRE55401 10 Amp Power Pack. Features Include: - With 10 amp directional control - Automatic electronic circuit protection - Power and over current indicator lights - Constant voltage pulse width speed control - Automatic electronic momentum circuit for smooth operation	$75.99 Was $84.99 Save 10% While quantities last

	Crest 55465 Switching Power Supply Features include: On/Off Switch with power light, internal automatic reset circuit breaker, three prong grounded plug to prevent shock damage or injury, internal cooling fan, highly accurate ammeter, highly filtered DC voltage, no AC leakage, no AC pulse power that can overheat fine motors, self regulating output, automatically compensates for load conditions, and no noise interference with other electronics.	$160.99 Was $179.00 Save 10% While quantities last

	Crest 55470 Train Engr Walk Around 2 This is a Crest 55470 Train Engineer Walk Around 2 Control System for any gauge DC model train: Z-N-HO-TT-O (2-Rail) and #1/G. It can be used with any almost any power supply up to 10 AMP DC. The set includes: a CRE-55473 Transmitter with a flexible stick antenna and 10-channel Train Operation Memory with Emergency Stop Over-ride button and 1 meter of track connector wire, and a CRE-55471 10-channel Linear Receiver with 10 AMP maximum output and attached soft wirelead antenna.	$213.99 Was $240.00 Save 10% While quantities last

	Crest 55492 Aristo-Craft 492 On Board Receiver & Transmitter-75MHZ Here is a Crest - Aristo-Craft 55492 On Board Train Engineer Receiver and Transmitter. It is 75 MHZ and includes complete instructions. The CREST 55492 On Board Train Engineer Wireless Radio Control System is designed for "plug and play" installation in any Aristo-Craft Locomotive with a DCC board. The receiver can also be installed in any large scale locomotive with the use of a supplied wiring adaptor. Locomotives without the Aristo-Craft DCC board will require wiring modifications to adapt to the receiver. operates on 10 different radio frequencies in the 75 MHz band. The receiver is also adaptable to operate in the 27 MHz band with the use of the CRE-55489 27 MHz frequency chip to be compatible with the older Train Engineer equipment. At each frequency, there are ten different control channels so that up to 100 different receivers can be controlled independently. The transmitter and receiver both use frequency synthesizers to create the ten RF frequencies so that no crystal	$302.99 Was $342.00 Save 11% While quantities last

	Crest 55601 Aristo-Craft 601 Auto Cutoff For Gell Cell Batteries This is a low voltage cut-off for gell cell batteries, for your G Scale trains.	$18.89 Was $21.00 Save 10% While quantities last

	LGB 5009 2X Power Doubler Controller EX-/Box This is an LGB 5009 controller. Use this to handle double the load going into your LGB 5007 throttle by connecting this to two LGB 5006 power packs. It has a green power on lamp and an orange indicator lamp	$85.99

	LGB 50111 6 Amp 120 Volt AC Transformer This is an LGB 50111 l Amp 120 Volt AC Transformer. This high-output AC transformer is the core of the LGB power packs. It provides safe, reliable AC power for your: Multi- Train System digital layouts / traditional analog layouts with the 51070, 52120 and 52121 analog throttles / AC powered accessories, like switches, signals and street lamps. This transformer also features: dual, sprin-loaded output terminals / short circuit and overheating protection / LED status indicators / AC input voltage: 110V / AC output voltage: 18 Volt / Maximum output amperage: 5.5A / Dimenions: 160 x 120 x 95mm. This transformer can be used with all MTS Central Stations and with all current 5-amp anlog throttles, however do not use this controller with older analog throttles, which require DC input.	$215.99 Was $241.98 Save 10% While quantities last

	LGB 50171 Model Train Transformer This is a LGB 50171 Model Train Transformer. It has a 120 VAC input and a 20VDC output. Use this together with the LGB 50175 Speed Control.	$104.99 Was $116.99 Save 10% While quantities last

	LGB 5072 Terminal Block Here is an LGB 5072 Terminal Block for wiring G scale trains.	$5.89 Was $33.99 Save 82% While quantities last

	LGB 50720 Distribution Strip This distribution strip allows you to connect up to 12 lines each.	$30.49 Was $33.98 Save 10% While quantities last

	LGB 50730 Terminal Strip This terminal strip can be used to extend up to 12 lines. The 12 terminals are each connected to the opposite terminal.	$30.49 Was $33.99 Save 10% While quantities last

	LGB 51070 Analog Throttle Here is a LGB 51070 Analog Throttle. It has enough power to run one train.	$230.99 Was $259.99 Save 11% While quantities last

	LGB 51233 Feeder Wires This two-pole, black and white wire is for AC connections on your LGB system.	$26.99 Was $29.98 Save 9% While quantities last

	LGB 51235 Double-Conductor Wire--Blue/Red This cable is specifically designed for powering your LGB tracks.	$26.99 Was $29.98 Save 9% While quantities last

	LGB 55015 Wireless Remote This is an LGB 55015 Wireless Transmitter. Features include an indicator light, a stop button, a pause button, a forward and reverse button.	$230.99 Was $259.99 Save 11% While quantities last

	LGB 55051 RC Wireless Transmitter This is an LGB 55015 RC WirelessTransmitter. It is the same as LGB 55050, but for North American frequencies. Enjoy the ultimate freedom of wireless remote control with the plug-and-play simplicity you expect from LGB! Just unplug the cable from your LGB 55015 Universal Remote or LGB 55016 Loco Remote. Then plug in this compact transmitter. It fits right inside the remote along with batteries (not included). That`s all! On Multi-Train System layouts, you can use up to eight transmitter-equipped remotes with one Wireless Receiver.	$118.99 Was $131.99 Save 9% While quantities last

	LGB 55056 Wireless Receiver for LGB's 55015, 55050/55051 Here is a LGB 55056 Wireless Reciever for LGB's 55015, 55050 and 55051. Use this receiver with your 55051 Wireless Transmitters. The receiver just connects to a Multi-Train System Central Station or 51070 Analog Throttle. There are no crystals to pick, no batteries to charge and no servos to adjust. Approximate wireless range is 50 to 65 ft. Use up to three receivers together to extend the range on very large MTS layouts. On analog layouts, you can use up to eight receivers with a matching number of 51070 throttles to control up to eight track blocks.	$217.99 Was $244.98 Save 11% While quantities last

Results Page: